How-To Repair Broken Ceramic Tile
If a tile and surrounding grout needs to be replaced, you can make the repair yourself using a tile and grout repair kit. The Tile Guard Tile Grout Repair Kit, contains a multi-purpose Tile Grout Adhesive and a grout saw. In just a few easy steps the inexperienced do-it-yourselfer can complete the repair in minutes.
Supplies :
- Tile Guard Tile Grout Repair Kit
- Replacement Tile
- Sponge
- Clean Wiping Cloth
Steps :
- First remove all the grout around the damaged tile with the grout saw. Scratch away the grout with the saw - avoid touching surrounding tiles with the grout saw, for it may scratch them.
- Pop out the damaged tile with a screwdriver. Always work from the center of the broken tile. Do not pry against surrounding tiles as it is easy to chip tiles next to the damaged one. Remove all broken pieces of tile and grout.
- Apply the pre-mixed tile grout to the back of the replacement tile and set the tile in place. The grout also acts as an adhesive for this purpose. Wait 1 to 2 hours.
- Grout around the new tile using the same tile grout. After you have filled the grout lines completely, use your fingertip or a mildly damp sponge and smooth the joint.
- Wait 15 minutes, then wipe off any excess, by wiping diagonally across each joint that was re-grouted with a damp sponge. After 1 hour, polish with a clean, dry cloth.
- Let the new grout dry (24 to 48 hours), and you have successfully repaired your tile.